SuperSafe Tanks Inc. - The Technological Leader in Cylopentane Tank Systems

CYCLOPENTANE SYSTEMS

Cylindrically Diked Storage and Dispensing
SuperSafe™ Cylindrically Diked® Storage and
Dispensing Systems

Featured Tank Components:

15-35 PSIG UL-142/2080 Fire Rated SuperSafe™ Integral Primary Tank,

Available in 3K, 5K, 8K, 10K, 12K, 15K, 20K, 25K, 30K, and 50K capacity.

UL-142/ 2085 Fire Rated 125% Capacity Cylindrical Dike®

UL-142/2085 Fire Rated Labeled Boxed Runner continuous supports with fire dam,

Nitrogeninerted interstitial secondary containment,

Seismic Zone 4 Certified hard points,

Exceeds UFC-A 11F Ballistic Standard,

Meets DOT and UL Impact Resistance Standard,

Exceeds CARB test requirements,

OSHA Approved ladder to top of secondary containment Cylindrical Dike® ,

NFPA - API sized emergency rupture disk vent for Primary Tank,

Overfill diverter into inerted Cylindrical Dike® ,

Closed overfill containment 24" inspection hatch,

NFPA - API sized emergency water tight venting for Cylindrical Dike® ,

NFPA - API sized normal pressure/vacuum working vent

NFPA - API sized liquid discriminating vent check valve,

EPA required Stage I Vapor Recovery System,

20" Bolted ingress manhole into Primary Tank,

OSHA steel constructed ladder to tank floor,

Two engineered lifting lugs,

Solar Powered Volume Gauge, large digital read out gallons,

Turbulence tube extends to tank bottom to protect gauge ballast,

2" Manual stick gauge access and lockable cap,

High level sensor mounting port,

Annular sump pipe and leak sensor port,

ž" Primary tank sumping pipe,

3" integrally welded; fill, and product circulation piping,

Internally mounted SuperSafe™ Hydraulic high-level, anti-siphon check valve,

3" Aluminum drop tube,

OPW floating suction with steel test cable (Optional)

API full penetration, sub-arc butt welded construction,

Epoxy coated interior primary tank per Mil. Spec. C-4556-F Standard,

ź" Seal welded reinforced strike plates,

Exterior coating two-part epoxy paint,

Heli-arc welded and certified leak tight circulation manifolding,

Integrally welded weather proof pump and dispensing enclosure

All necessary NFPA / API required signage.

[Continue to Page 2]

Company | Petroleum | Design | Standards | Systems | Selection | Safety | Solicitation
Cyclopentane | Contract | Trucks | Warranty | Specs | Photos | Links | Contact

Copyright © 1999-2002 SuperSafe^TM Tanks Inc.
Web and Graphic Design by Fortress Web Design



	CYCLOPENTANE SYSTEMS SuperSafe™ Cylindrically Diked® Storage and Dispensing Systems Featured Tank Components: 15-35 PSIG UL-142/2080 Fire Rated SuperSafe™ Integral Primary Tank, Available in 3K, 5K, 8K, 10K, 12K, 15K, 20K, 25K, 30K, and 50K capacity. UL-142/ 2085 Fire Rated 125% Capacity Cylindrical Dike® UL-142/2085 Fire Rated Labeled Boxed Runner continuous supports with fire dam, Nitrogeninerted interstitial secondary containment, Seismic Zone 4 Certified hard points, Exceeds UFC-A 11F Ballistic Standard, Meets DOT and UL Impact Resistance Standard, Exceeds CARB test requirements, OSHA Approved ladder to top of secondary containment Cylindrical Dike® , NFPA - API sized emergency rupture disk vent for Primary Tank, Overfill diverter into inerted Cylindrical Dike® , Closed overfill containment 24" inspection hatch, NFPA - API sized emergency water tight venting for Cylindrical Dike® , NFPA - API sized normal pressure/vacuum working vent NFPA - API sized liquid discriminating vent check valve, EPA required Stage I Vapor Recovery System, 20" Bolted ingress manhole into Primary Tank, OSHA steel constructed ladder to tank floor, Two engineered lifting lugs, Solar Powered Volume Gauge, large digital read out gallons, Turbulence tube extends to tank bottom to protect gauge ballast, 2" Manual stick gauge access and lockable cap, High level sensor mounting port, Annular sump pipe and leak sensor port, ž" Primary tank sumping pipe, 3" integrally welded; fill, and product circulation piping, Internally mounted SuperSafe™ Hydraulic high-level, anti-siphon check valve, 3" Aluminum drop tube, OPW floating suction with steel test cable (Optional) API full penetration, sub-arc butt welded construction, Epoxy coated interior primary tank per Mil. Spec. C-4556-F Standard, ź" Seal welded reinforced strike plates, Exterior coating two-part epoxy paint, Heli-arc welded and certified leak tight circulation manifolding, Integrally welded weather proof pump and dispensing enclosure All necessary NFPA / API required signage. [Continue to Page 2]
	Company \| Petroleum \| Design \| Standards \| Systems \| Selection \| Safety \| Solicitation Cyclopentane \| Contract \| Trucks \| Warranty \| Specs \| Photos \| Links \| Contact

	Copyright © 1999-2002 SuperSafe^TM Tanks Inc. Web and Graphic Design by Fortress Web Design