SYSTEM OPTIONS: SUPERSAFE TANK COMPONENTS
SuperSafe Full Pump House. Designed
to enclose the complete delivery transport off-loading, fuel circulation, filtering, metering and dispensing systems.
The house is 8'6" wide, 5'6" deep and 8'9" high at the center. An all steel, lockable, overhead
roll-up door measures 7'8" wide and 6'0" high with nylon brush around the perimeter to keep out dirt,
snow, bugs. The unit is weather proof, hurricane resistant, and vandal resistant.
The 1/4" steel floor is designed
as a spill pan to catch small leaks and maintenance spills. A locking drain is provided to vacate collected liquids
as necessary. The floor is welded to 4" channel to provide reinforcement and create a platform. The roof is
3/16" CRS seal welded throughout to eliminate hidden water pockets where deterioration might occur over time.
This completely assembled unit is seal welded to the head of the Cylindrical Dike, shot blasted to SP-6 near white
condition and painted with 8 to 10 mils of self-priming Tank White Valspar V75W9 epoxy paint.
The SuperSafe Half House. The
SuperSafe System includes a equipment enclosure designed to protect the operator form spills that might occur during
the fuel delivery process, or during regular fuel sampling and filter maintenance. The Half House encloses the
fuel receiving adapter, locking b'fly valve, check valve, vapor recovery adapter and associated piping. Since the
submersible pump is installed inside the tank, the sumping and dispensing components are all that remain to be
enclosed. This includes the fire check valve, ball valveing, filter, meter, hose reel, hose, and nozzle.
The half-house measures 6'0"
wide, 4'9" deep and 7'0" high at the center of the roof. The compartment opening is closed utilizing
a 5'2" wide and 5'0" high steel roll-up door. Nylon brush around the perimeter to keep out dirt, snow
and bugs. This all steel, lockable, overhead roll-up door is weather proof, hurricane, and vandal resistant. The
¼" steel floor is designed to contain any maintenance spills and is welded to 4" channel to provide
reinforcement and create a platform. A locking drain is provided to vacate collected liquids as necessary. The
roof is shed style with a drip edge along the front made of 3/16" CRS seal welded throughout to eliminate
hidden water pockets where deterioration might occur.
SuperSafe Canopied Platform. Designed
for high foot-traffic areas and to shelter during fueling activities. This structure is 8'6" wide, 5'6"
deep and 6'6" high. The rounded, all steel, seal-welded roof projects out over a steel platform that measures
8' -6" wide, 5' -6" deep and has a 3" liquid tight curb around the perimeter. The outer corners
are collision protected with heavy 4" angle iron seal welded between the roof and spill pan. This design also
includes all of the standards and features of the half- and full houses.
[CONTINUE TO PAGE TWO]
